The Magnaflux M-Series Mobile Power Pack facilitates testing of large and abnormally heavy parts.

Magnaflux understands some parts cannot be moved so the magnetizing station needs to be brought to the part. The M Series offers a solution by providing an adaptable mobile unit. These units feature AC or Half Wave DC output. Output rating is based on Load Specified.  Note: M-2030 for long cable output is designed for applications in which the power source cannot be close to the inspection piece. This unit designed to work with long cable lengths necessary for inspecting large parts (i.e. power generator parts).

STANDARD FEATURES for the M-2060

Exterior:

- Digital Meter Display

- Two Bus Bars for Connection

- Push button Switch for AC output

- Push button Switch for HWDC output

- Push button Switch for Mag - Momentary – magnetizes as long as button

is pushed

- Push button Switch for Demag - One touch auto cycle and switches to

decaying AC automatically

- Push button Switch for power on/off

- Push button Switch for pulse - 1.5 sec on, 3 sec off for 30 sec

- Infinitely variable current control

- Two (2) fixed heavy-duty casters

- Two (2) swivel casters with locks

- Lift hooks for extra unit mobility

- 115 Volt Convenience Outlet (10 amp)

Internal:

- Thermal Overload for circuitry protection

- PLC Circuitry for extra reliability

- Secondary Current Control

- Flow through cooling for heat dissipation

- Solid State Switching (AC to HWDC)

SPECIFICATIONS

- Output: 6000 amps AC and HWDC magnetizing current

- Output rated with two 30’ of 4/0 cables ran in parallel

- Dimensions: 46” L x 23” W x 39” H

- Weight: 780 lbs.

- Available Voltages: 380, 415, 460, 575, 50 or 60 hertz, single phase

power

- 7% Duty Cycle (maximum output with 1/2 minute ON time)